Page 1 of 1

connectTimeoutException

PostPosted: Sat Apr 27, 2013 5:33 pm
by Sethdw
I am at a loss- It's driving me crazy that I cant access Subsonic through any iphone apps that I've purchased, I'm not a computer genius (obviously) and setting up ports and static connections is well on the edge of my understanding. Could you please help???
I think I need to open a port on my Linksys router? but I dont know how.

I'm sure this question has been asked and answered, and I've read those- I just need one on on info!!!
thanks!!

"Status: sethdw.subsonic.org is registered, but could not connect to it. (ConnectTimeoutException)"

Re: connectTimeoutException

PostPosted: Sat Apr 27, 2013 8:45 pm
by alphawave7
Howdy Sethdw!

Surmised correctly...you need to open a port to the outside (WAN) world. Grab your router's manual from Linksys' website, and follow the instructions in it to open port 4040. Reboot your router after making changes, and test your port at canyouseeme.org. G'Luck!

Re: connectTimeoutException

PostPosted: Sat Apr 27, 2013 10:02 pm
by Sethdw
Ive done everything I can in configuring my ports, guessing on a few values here and there... but still the same messages. and the open port website 'canyouseeme' is even more confusing; it CAN'T see me and says that my ip is something completely different than I thought that it was... more confused.

Re: connectTimeoutException

PostPosted: Sat Apr 27, 2013 10:08 pm
by Sethdw
for example... why in my routers settings are there 'port ranges'? if I want to open ports 80 and 4040, what is the ranges of those settings? hmmm.
http://downloads.linksys.com/downloads/ ... %20web.pdf

Re: connectTimeoutException

PostPosted: Sat Apr 27, 2013 11:42 pm
by alphawave7
It appears to have registered once, so perhaps your LAN IP changed? Make your server computer a fixed LAN IP (eg. 192.168.1.7/255.255.255.0) first(either through router or host's adapter settings), then go about setting 4040 as an open port on the router. Canyouseeme.org always reports your WAN (public) IP, simply enter 4040 in the box to test.

edit: you can ignore 'port ranges' and simply put 4040 as beginning, and 4040 as ending.

Re: connectTimeoutException

PostPosted: Sun Apr 28, 2013 5:13 pm
by Sethdw
thanks for all of this... but then wht do I put as 'IP address" with each port forward? certainly not mine? or?...

Re: connectTimeoutException

PostPosted: Sun Apr 28, 2013 5:15 pm
by Sethdw
and no, as simple as this all seems canyouseeme.org says "Error: I could not see your service on 24.19.58.xxx on port (4040)
Reason: Connection timed out"

Re: connectTimeoutException

PostPosted: Sun Apr 28, 2013 5:32 pm
by Sethdw
getting somewhere, maybe? now after sitting here all the sudden my status is:

Status: Successfully forwarding port 4040.

BUT

Status: sethdw.subsonic.org is registered, but could not connect to it. (ConnectTimeoutException)

dont know

Re: connectTimeoutException

PostPosted: Sun Apr 28, 2013 5:49 pm
by Sethdw
i actually dont believe it as its still not working and canyouseeme is still saying it 'cant' :)

Re: connectTimeoutException

PostPosted: Sun Apr 28, 2013 11:49 pm
by alphawave7
Sethdw wrote:thanks for all of this... but then wht do I put as 'IP address" with each port forward? certainly not mine? or?...


Typically, it's like: Port Range Start (4040) Port Range End (4040) TCP/UDP (Both) IP (LAN IP of your host machine). Click Save, then reboot router. After reboot, nav to canyouseeme.org and test port 4040.

Re: connectTimeoutException

PostPosted: Mon Apr 29, 2013 4:31 am
by Sethdw
done it. several times. totally not working. I do get it in theory. just, canyouseeme aint seeing. on the other hand, Subsonic is finally saying "Status: Successfully forwarding port 4040." but cant find my 'address' "Status: sethdw.subsonic.org is registered, but could not connect to it. (ConnectTimeoutException) "

Re: connectTimeoutException

PostPosted: Mon Apr 29, 2013 4:36 am
by Sethdw
this all seems so stupid when Audiogalaxy worked always without a hitch and apps like Tonido and any mouse apps are the easiest to figure out. :roll:

Re: connectTimeoutException

PostPosted: Mon Apr 29, 2013 4:46 am
by alphawave7
Sethdw wrote:done it. several times. totally not working. I do get it in theory. just, canyouseeme aint seeing. on the other hand, Subsonic is finally saying "Status: Successfully forwarding port 4040." but cant find my 'address' "Status: sethdw.subsonic.org is registered, but could not connect to it. (ConnectTimeoutException) "

Double-check the firewall on the server computer, ensure Subsonic has an exception.

Re: connectTimeoutException

PostPosted: Thu May 30, 2013 2:42 am
by DustbinK
Sethdw wrote:done it. several times. totally not working. I do get it in theory. just, canyouseeme aint seeing. on the other hand, Subsonic is finally saying "Status: Successfully forwarding port 4040." but cant find my 'address' "Status: sethdw.subsonic.org is registered, but could not connect to it. (ConnectTimeoutException) "


I'm getting this same error with all of the same symptoms.

Status: Successfully forwarding port 8080 and port 4443.

But then:

Status: dustbink.subsonic.org is registered, but could not connect to it. (ConnectTimeoutException)

And I get the same things as Sethdw when going to canyouseeme

The ports are forwarded, this computer has a static IP.

This only happened after I paid for an account.