Page 1 of 1
HELP PLEASE

Posted:
Wed May 08, 2013 6:36 am
by inkmybus
I want to buy this soooo bad, but it won't let me connect to my Galaxy s3. It connected just fine yesterday, then all of a sudden it stopped working. I didn't have to change any ports or anything to make it work, but now I am following all these steps that I found and nothing comes up.

Re: HELP PLEASE

Posted:
Wed May 08, 2013 6:47 am
by alphawave7
If using Windows as your server, follow this tute and see how it goes:
viewtopic.php?f=6&t=4867
Re: HELP PLEASE

Posted:
Wed May 08, 2013 8:00 am
by inkmybus
I did that whole thing at least 3 times... I don't know what else to do?
Re: HELP PLEASE

Posted:
Wed May 08, 2013 2:11 pm
by alphawave7
What part of that process fails? Have you tested your port against canyouseeme.org port tester?
Sent from my Nexus 4 using Tapatalk 2
Re: HELP PLEASE

Posted:
Wed May 08, 2013 5:21 pm
by inkmybus
alphawave7 wrote:What part of that process fails? Have you tested your port against canyouseeme.org port tester?
Sent from my Nexus 4 using Tapatalk 2
I'm guessing the part where I forward the ports. I did all the directions and then I go to canyouseemee.org and it says Reason: Connection timed out
Re: HELP PLEASE

Posted:
Wed May 08, 2013 5:33 pm
by inkmybus
This is my forwarding ports.
http://imgur.com/grjdf2U,bwmoUYgThis is my static IP
http://imgur.com/grjdf2U,bwmoUYg#1Did I do this wrong?
Re: HELP PLEASE

Posted:
Wed May 08, 2013 7:05 pm
by alphawave7
Not wrong...just incomplete. The pic shows you've opened 8080 for INTERNAL passage..but you've left EXTERNAL unpopulated. Complete the external (right column) just as you have on the left, and you should be golden. Reboot after that change and test at canyouseeme.
Sent from my Nexus 4 using Tapatalk 2
Re: HELP PLEASE

Posted:
Wed May 08, 2013 7:12 pm
by inkmybus
alphawave7 wrote:Not wrong...just incomplete. The pic shows you've opened 8080 for INTERNAL passage..but you've left EXTERNAL unpopulated. Complete the external (right column) just as you have on the left, and you should be golden. Reboot after that change and test at canyouseeme.
Sent from my Nexus 4 using Tapatalk 2
Thanks so much, ima try once I get home.
Re: HELP PLEASE

Posted:
Thu May 09, 2013 7:12 am
by inkmybus
alphawave7 wrote:Not wrong...just incomplete. The pic shows you've opened 8080 for INTERNAL passage..but you've left EXTERNAL unpopulated. Complete the external (right column) just as you have on the left, and you should be golden. Reboot after that change and test at canyouseeme.
Sent from my Nexus 4 using Tapatalk 2
Alright I did what you said and it stills says connection timed out
http://i.imgur.com/NLCpYYz.png?1
Re: HELP PLEASE

Posted:
Fri May 10, 2013 12:21 am
by alphawave7
Looks good. Reboot router and server...and make sure server firewall (windows) also has an exception for Subsonic on 8080.
Sent from my Nexus 4 using Tapatalk 2
Re: HELP PLEASE

Posted:
Fri May 10, 2013 1:38 am
by inkmybus
alphawave7 wrote:Looks good. Reboot router and server...and make sure server firewall (windows) also has an exception for Subsonic on 8080.
Sent from my Nexus 4 using Tapatalk 2
I did that and still nothing at all.

Re: HELP PLEASE

Posted:
Fri May 10, 2013 4:19 am
by alphawave7
Odd...the new router settings match my own ( just a different port), so double-check your server IP via command prompt->Ipconfig...ensure it comes back as 198.168.0.105. Double-check the Windows Firewall has 8080 open for Subsonic. No port will be open unless Subsonic is running, and can pass thru the local firewall, then the NAT/SPI firewall on your router.
Re: HELP PLEASE

Posted:
Tue May 14, 2013 8:56 am
by oshogg
I had the same problem and I noticed that my windows PC was considering the network connection as "Public" (as opposed to Private). Make sure it is Private. I changed it in the windows control center under network and sharing and then subsonic started working for me correctly.
Osho