Resolved: Can't Connect

[alphawave7]

i'm logged into my router now

Step 3 and 4..and enter

Subsonic...4040 Ext port, 4040 Int port, BOTH for protocol, Server's IP octets, ensure 'enabled' box is checked, and SAVE.

[alphawave7]

If you haven't already done so, be sure to fix the server's IP, so it is static.

[alphawave7]

After the port has been changed..REBOOT your router. Once it comes back up, go to canyouseeme.org, and test 4040...is should say 'Success! I can see your service on port 4040!'

[JusWannaJAM]

do i put my cpu's IP address in???

[JusWannaJAM]

i'm logged into my router now

Step 3 and 4..and enter

Subsonic...4040 Ext port, 4040 Int port, BOTH for protocol, Server's IP octets, ensure 'enabled' box is checked, and SAVE.

Server ip octets is my cpu correct?

[alphawave7]

do i put my cpu's IP address in???

Yes. Recall that we need to make it static, too...we'll do that next.

[alphawave7]

i'm logged into my router now

Step 3 and 4..and enter

Subsonic...4040 Ext port, 4040 Int port, BOTH for protocol, Server's IP octets, ensure 'enabled' box is checked, and SAVE.

Server ip octets is my cpu correct?

Yep!

[JusWannaJAM]

If you haven't already done so, be sure to fix the server's IP, so it is static.

it is static that i do know

[alphawave7]

If you haven't already done so, be sure to fix the server's IP, so it is static.

it is static that i do know

eggcellent!

[JusWannaJAM]

After the port has been changed..REBOOT your router. Once it comes back up, go to canyouseeme.org, and test 4040...is should say 'Success! I can see your service on port 4040!'

do i unplug my router or look for a reboot in the router menu???

[alphawave7]

After the port has been changed..REBOOT your router. Once it comes back up, go to canyouseeme.org, and test 4040...is should say 'Success! I can see your service on port 4040!'

do i unplug my router or look for a reboot in the router menu???

I prefer a cold boot...unplug at the back, wait 30 seconds, plug it in.

[JusWannaJAM]

After the port has been changed..REBOOT your router. Once it comes back up, go to canyouseeme.org, and test 4040...is should say 'Success! I can see your service on port 4040!'

do i unplug my router or look for a reboot in the router menu???

I prefer a cold boot...unplug at the back, wait 30 seconds, plug it in.

k doing that now...

[alphawave7]

Once back up, make sure Subsonic service is still running, and test port @ canyouseeme.org

[JusWannaJAM]

Error: I could not see your service on 98.16.161.163 on port (4040)
Reason: Connection timed out

[alphawave7]

Error: I could not see your service on 98.16.161.163 on port (4040)
Reason: Connection timed out

Stop and restart Subsonic, go to settings->Network, and check the Use Easy to Remember Name...and test again @ canyouseeme